TM 9-2350-222-20-1-5
ROTARY PUMP AND SUCTION HOSE REPLACEMENT (Sheet 2 of 4)
3.
Using 3/4 inch socket on screw (F) and 3/4 inch wrench on nut (G), remove screw (F), nut (G),
lockwasher (H), gasket (J), and pump (K). Throw gasket and lockwashers away.
NOTE
It may be necessary to use
screwdriver to remove pump (K).
4.
Using 3/4 inch wrench, remove four screws (L), lockwashers (M), two flanges (N), hose assembly
(P), and packing (Q). Throw packing and lockwashers away.
CLEANING AND INSPECTION:
1.
Clean all metallic parts in dry cleaning solvent (Item 54, Appendix D).
2.
Inspect all parts for damage or wear.
Go on to Sheet 3
TA141216