TM 9-2350-222-20-1-5
PUMP MOUNTING BRACKET REPLACEMENT (Sheet 1 of 1)
3/4 in. combination box and open end wrench
TOOLS:
Lockwasher (MS35338-48) (3 required)
SUPPLIES:
Remove right angle drive, clutch, and pump (page 18-101).
PRELIMINARY PROCEDURE:
NOTE
Clamp may be secured by one
of three screws (A).
REMOVAL:
1.
Using wrench, remove three screws and lock-
washers (A). Throw lockwashers away.
2.
Using wrench, loosen screw and lockwasher (B).
3.
Pull bracket (C) toward you, slipping it loose
from screw and lockwasher (B).
4.
Using wrench, remove three spacers (D).
1.
Using wrench, install three spacers (D).
2.
Position bracket (C) on screw (B).
NOTE
Place clamp (E) in position, if
removed.
3.
Using wrench, install three screws and new
lockwashers (A).
Install right angle drive, clutch, and pump
End of Task
TA253662
