TM 9-2350-222-20-1-5
MAGNETIC CLUTCH AND HOUSING REPLACEMENT (Sheet 2 of 6)
4.
Using 1/2 inch wrench, remove eight nuts and lockwashers (C). Throw lockwashers away.
NOTE
It may be necessary to use
screwdriver to
hammer
and
remove clutch housing assembly.
5.
Pull right angle drive (D) and clutch housing
assembly (E) loose from magnetic clutch (F).
6.
Remove and throw away gasket (G).
7.
Wrap drive gear spline with three or more layers of electrician's tape (Item 58, Appendix D).
8.
Using pliers, hold drive gear spline from turning while using 9/16 inch socket to remove screw (H)
and lockwasher (J). Throw lockwasher away.
9.
Remove spider (K) from clutch housing assembly (E).
10.
Using 1/2 inch wrench, remove six screws and lockwashers (L). Throw lockwashers away.
Pull clutch housing assembly (E) and right angle drive (D) apart.
11.
Go on to Sheet 3
TA141221
18-119
