TM 9-2350-222-20-1-5
ROTARY PUMP AND SUCTION HOSE REPLACEMENT (Sheet 1 of 4)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Cleaning and Inspection
Installation
11/16 in. socket with 1/2 in. drive
TOOLS:
3/4 in. socket with 1/2 in. drive
3/4 in. combination box and open end wrench
5 in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
Center punch
Hinged handle with 1/2 in. drive
Preformed packing (MS28775-232) (3 required)
SUPPLIES:
Gasket (10940669)
Dry cleaning solvent (Item 54, Appendix D)
Lockwasher (MS35338-48) (14 required)
Remove right angle drive, clutch, and pump (page 18-101)
PRELIMINARY PROCEDURE:
Using 11/16 inch socket, remove four nuts, lockwashers (A), and bracket (B). Throw lockwashers
1.
away.
Using 3/4 inch wrench, remove four screws, lockwashers (C), elbow (D), and packing (E). Throw
2.
packing and lockwashers away.
TA253661
