TM9-2350-222-20-1-3
FUEL-WATER SEPARATOR DRAIN LINES REPLACEMENT (2D ENGINE) (Sheet 6 of 6)
6.
Install tee (F) into vise, and using 11/ 16 inch wrench, install adapter (G) into tee (F).
7
Remove tee (F) and adapter (G) assembly from vise.
8.
Position tee (F) and adapter (G) assembly into
mounting bracket (H).
9.
Using 11/16 inch wrench to hold adapter (G),
use 11/16 inch wrench and install new
lockwasher and nut (J) onto adapter (G).
10.
Using adjustable wrench, install drain valve (K)
into tee (F).
11.
Position hose assembly (L) to adapter (G) and
elbow (M).
12.
Using 9/16 inch wrench, install hose
assembly (L) to adapter (G) and elbow (M).
13.
Using 9/16 inch wrench, install hose
assembly (D) to tee (F).
14.
Position clamp (N) onto hose assembly (L).
15.
Using 9/16 inch wrench, install nut (P) to
secure clamp (N).
16.
Close drain valve (K) by turning clockwise.
17.
thru 11).
18.
End of Task
TA148892
7-313