TM9-2350-222-20-1-3
FUEL-WATER SEPARATOR DRAIN LINES REPLACEMENT (2D ENGINE) (Sheet 2 of 6)
REMOVAL:
1. Place drip pan and rags (Item 65, Appendix D)
as required under manual drain valve (A).
2.
Using pliers, open manual drain valve (A) by
turning valve handle counterclockwise.
3.
Using 7/16 inch wrench, turn bleed cap (B)
counterclockwise until loose.
4.
Allow fuel in fuel-water separator filter (C) to
drain through manual drain valve (A).
5.
Using 7/16 inch wrench, turn bleed cap (B)
clockwise until snug.
Go on to Sheet 3
TA148888
7-309