TM 9-2350-222-20-1-3
TRANSMISSION OIL COOLER REPLACEMENT (2D ENGINE) (Sheet 3 of 10)
Using plastic barrier material (Item 41,
6.
Appendix D) and masking tape (Item 57,
Appendix D), wrap ends of hoses (E) and (F)
and transmission connectors (D) to keep out
dirt.
7.
Place drip pan or rags under cooler
connectors (G).
8.
Using 1-1/2 inch wrench, remove hose (H) from
cooler connectors (G).
Using 1-1/2 inch wrench, remove hose (J) from
9.
cooler connector (G).
Using plastic barrier material (Item 41, Appendix D) and masking tape (Item 57, Appendix D),
10.
wrap ends of hoses (H) and (J) and cooler connectors (G) tO keep out dirt.
