TM 9-2350-222-20-1-3
TRANSMISSION OIL COOLER REPLACEMENT (2D ENGINE) (Sheet 8 of 10)
10. Using socket with extension through harness,
install screws and washers (G).
11.
Remove plastic barrier material and masking tape
from end of hose (H) and cooler connector (J).
2.
Using 1-1/2 inch wrench, install hose (H) to
cooler connector (J).
Remove plastic barrier material and masking
13.
tape from ends of hose (K) and cooler connector
(L).
14.
Using 1-1/2 inch wrench, install hose (K) to
cooler connector (L).
Go on to Sheet 9
TA139520
6-153