TM 9-2350-222-20-1-5
HYDRAULIC PUMP VALVE AND ASSOCIATED LINES REPLACEMENT (Sheet 2 of 11)
REMOVAL:
1.
Using 9/16 inch socket, remove two screws
2.
Remove knob (C) from handle (B).
3.
Using 1-1/2 inch wrench, remove nut (D) on
tube (E).
4.
Using 1-1/2 inch wrench, remove nut (F) from
tee (G).
5.
Using 1-1/2 inch wrench, remove nut (H) from
NOTE
tee (G).
It may be necessary to loosen
mounting screws on base of
valve to allow movement of
valve in order to remove tubes.
Remove tube (E) from vehicle.
Using automotive wrench, remove tee (G).
Using 1-1/4 inch wrench, remove nut (J)
from adapter (K).
Using 1-1/2 inch wrench, remove nut (L)
9.
from tee (M) and remove valve and tube
assembly (N) from vehicle.
Using 1-7/16 inch wrench, remove adapter
10.
and packing (K) from reservoir and throw
packing away.
Using automotive wrench to hold tee (M), use
11.
1-1/2 inch wrench to remove nut (P) from tee
(M).
Using 1-7/16 inch wrench to hold adapter
12.
(R), use 1-1/2 inch wrench to remove nut (Q)
13.
Using 1-1/2 inch wrench on nut (T) and using
from adapter (R). Remove tube assembly (S)
automotive wrench to hold tee (M), remove nut
from vehicle.
(T) from tee (M). Remove tee (M) from vehicle.
14.
Using 1-7/16 inch wrench, remove adapter (R)
from valve (U).
Go on to Sheet 3
18-46