TM 9-2350-222-20-1-5
HYDRAULIC PUMP VALVE AND ASSOCIATED LINES REPLACEMENT (Sheet 3 of 11)
Using 9/16 inch socket, remove screw and
15.
lockwasher (V) and remove clamp (W). Make
sure both parts of clamp are removed. Throw
lockwasher awav.
Using 1-1/2 inch wrench on nut (X), remove nut
16.
(X) from elbow (Y).
Using 1-1/2 inch wrench on nut (Z), remove nut
17.
(Z) from elbow (AA).
NOTE
Tag tube and hose assemblies (AD)
and (AG) during removal to help in
later installation.
Using 1-7/16 inch wrench to hold adapter (AB),
18.
and using 1-1/2 inch wrench on nut (AC),
remove nut (AC) from adapter (AB). Remove
tube assembly and hose assembly (AD) from
vehicle.
Using 1-7/16 inch wrench, remove adapter (AB)
19.
from valve (U).
Using 1-7/16 inch wrench to hold adapter (AE),
20.
and using 1-1/2 inch wrench on nut (AF),
remove nut (AF) from adapter (AE). Remove
tube assembly and hose assembly (AG) from
vehicle.
Using 1-7/16 inch wrench, remove adapter (AE)
21.
from valve (U).
NOTE
Tag tubes (AK) and (AN) during
removal
to
help
in
later
installation.
Using 9/16 inch socket, remove screw and
22.
lockwasher (AH), take off clamp (AJ) and tube
(AK), and make sure both parts of clamp are
removed.
Using 1-7/16 inch wrench to hold adapter (AL)
23.
and 1-1/2 inch wrench on nut (AM) remove
tube (AN).
24. Using 1-7/16 inch wrench, remove adapter (AL) from valve (U).
Go on to Sheet 4
18-47