TM 9-2350-222-20-1-5
HYDRAULIC RESERVOIR MOUNTING BRACKET REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1.
Position bracket (A) onto reservoir bracket (B).
2.
By hand, install two screws and two washers
(C) through reservoir bracket (B) and mounting
bracket (A).
3.
Using wrench and socket, install two nuts (D)
and two washers (E) onto two screws and two
washers (C).
4.
Using socket, install two screws and new
lockwashers (F) and two washers (G) through
mounting bracket (A) into hull.
5.
Install driver's seat assembly (page 17-43).
6.
Install driver's escape hatch (page 16-134).
End of Task
18-42
