TM 9-2350-222-20-1-5
HYDRAULIC PUMP VALVE AND ASSOCIATED LINES REPLACEMENT (Sheet 1 of 11)
PROCEDURE INDEX
PAGE
PROCEDURE
18-46
Removal
18-50
Cleaning and Inspection
18-50
Installation
TOOLS: 1-1/4 in. open end wrench
5/8 in. socket head key
3/4 in. combination box and
(allen wrench)
open end wrench
Ball peen hammer
9/16 in. socket with 1/2 in. drive
Cold chisel
1/4 in. electric drill
1-5/8 in. open end wrench
3/32 in. twist drill
1-1/2 in. open end wrench
1-7/16 in. open end wrench
15 in. Adjustable automotive wrench
SUPPLIES: Adhesive (Item 2, Appendix D)
Pencil
Dry cleaning solvent (Item 54,
Rags (Item 65, Appendix D)
Appendix D)
Preformed packing (MS28775-228)
Tape (Item 67, Appendix D)
Preformed packing (MS38778-12)
Paper tags
(3 required)
Drive screws (MS21318-8)
Lockwasher (MS35338-25)
(4 required)
(2 required)
Lockwasher (MS35338-27)
Lockwasher (MS35338-29)
(2 required)
(4 required)
LO 9-2350-222-12
REFERENCES:
TM 9-2350-222-10
Remove bulldozer actuating cylinder tubes
PRELIMINARY PROCEDURES:
(page 18-35)
Remove three fire extinguisher cylinders and lines (page 21-49)
Drain hydraulic reservoir (LO 9-2350-222-12)
Remove driver's seat assembly (page 17-41)
Go on to Sheet 2
18-45