TM 9-2350-222-20-1-5
HYDRAULIC PUMP VALVE AND ASSOCIATED LINES REPLACEMENT (Sheet 7 of 11)
5.
Install new packing (J) onto reducer (K) and
union (L).
6.
Using vise to hold valve (M), and using 1-5/8
inch wrench on reducer (K), install reducer (K)
into end of valve (M) marked `PRESS.'
7.
Using vise to hold valve (M), and using
automotive wrench on union (L), install union
(L) into end of valve marked `RET.'
8.
Connect nut on tube (N) onto reducer (K). Do
not tighten at this time.
9.
Connect nut on tube (P) onto union (L). Do not
tighten at this time.
10.
Using vise to hold elbows (Q) or (R), connect
tube assembly (S) or (T) to elbow.
11.
Using vise to hold elbows (U) or (V), connect
tube assembly (W) or (X) to elbow.
12.
Connect hose assembly (Y) or (Z) to elbow.
13.
Using 1-1/2 inch wrench, tighten hose
assembly (Y) or (Z) onto elbow.
14.
Remove hose, elbow, and tube assembly from
vise.
Go on to Sheet 8
TA141153
18-51
