TM 9-2350-222-20-1-5
HYDRAULIC RESERVOIR MOUNTING BRACKET REPLACEMENT (Sheet 1 of 2)
TOOLS: Ratchet with 1/2 in. drive
3/4 in. socket with 1/2 in. drive
10 in. extension with 1/2 in. drive
3/4 in. combination box and open end wrench
SUPPLIES: Lockwashers (MS35338-48) (2 required)
Remove driver's seat assembly (page 17-41)
PRELIMINARY PROCEDURES:
Remove escape hatch (page 16-133)
REMOVAL:
Using socket, remove two screws, lockwashers
1.
and flat washers (A) from hull mount. Throw
lockwashers away.
Using wrench on two nuts (B) behind bracket
2.
(C), and using socket on two screws (D), remove
two nuts and washers (B) (hidden) and two
screws and washers (D).
Remove bracket (C) from vehicle.
3.
Go on to Sheet 2
18-41
