TM
9-2350-222-20-1-5
LINEAR ACTUATING (RAM) CYLINDER AND GUARDS REPLACEMENT (Sheet 1 of 8)
.
PROCEDURE INDEX
PROCEDURE
Removal
Cleaning and Inspection
Installation
3/4 in. socket with 1/2 in. drive
TOOLS:
15/16 in. socket with 1/2 in. drive
1-1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
10 in. extension with 1/2 in. drive
10 in. adjustable wrench
10 in. pipe wrench
11/ 16 in. combination box and open end wrench
3/4 in. combination box and open end wrench
1-1/4 in. combination box and open end wrench
1-3/8 in. combination box and open end wrench
Lifting device (200 pound capacity)
Lifting sling
SUPPLIES:
Container to catch fluid
Preformed packing (MS28778-12)
Plastic pipe plugs
Lockwasher (MS35335-39)
Lockwasher (MS35338-48) (8 required)
Plastic caps
Lockwasher (MS35338-53) (4 required)
Sealing tape (Item 68,
Lockwasher (MS35340-48) (4 required)
Lockwasher (MS35340-50) (2 required)
Dry cleaning solvent
(Item 54, Appendix D)
PERSONNEL: Two
REFERENCE: TM 9-2350-222-10
Lower moldboard to ground
PRELIMINARY PROCEDURE:
