TM 9-2350-222-20-1-5
EXTERNAL HANDSET BOX SUPPORT REPLACEMENT (EARLY MODEL) (Sheet 1 of 2)
TOOLS: 9/16 in. socket with 1/2 in. drive
1-1/2 in. socket with 3/4 in. drive
9/16 in. combination box and open end wrench
3-1/4 in. extension with 3/4 in. drive
SUPPLIES: Lockwasher (MS35338-72) (3 required)
PRELIMINARY PROCEDURES: Remove external handset box (page 16-193)
Remove cable assembly from bracket (page 10-385)
1.
Using 1-1/2 inch socket, remove three
Remove handset support (D).
2.
3.
Using 9/16 inch wrench and 9/16 inch socket,
remove screw (E) and flat washer (F).
4.
Remove support (G), flat washer (H), and
nut (J).
TA253649
Go on to Sheet 2