TM 9-2350-222-20-1-5
HANDSET BOX BRACKET OR CABLE GUARD REPLACEMENT (LATE MODEL) (Sheet 2 of 3)
5.
Using 1-1/8 inch socket, remove three
screws (J) and lockwashers (K) securing
bracket (D) and outrigger (L). Throw
lockwashers away.
Remove bracket (D) off outrigger (L).
6.
INSTALLATION:
NOTE
If installing cable guard only, perform steps 5 through 8.
Position bracket (A) over outrigger (B).
1.
Using fingers, install three screws (C) and
2.
new lockwashers (D) to secure outrigger
(B) and bracket (A).
Using torque wrench and 1-1/8 inch sock-
3.
et, tighten screws (C) 125-130 lb-ft (169-176
Go on to Sheet 3
TA253652
16-202.2
