TM 9-2350-222-20-1-5
EXTERNAL HANDSET BOX ASSEMBLY AND LIGHT ASSEMBLY REPAIR (Sheet 3 of 6)
Using screwdriver and 11/32 inch wrench,
nuts (N) to remove spring clip (P) from inside
Using 1/2 inch wrench on nut (Q) and another
9.
1/2 inch wrench on nut (R), remove nut (Q),
washer (S), pawl (T), washer (U), and nut (R).
Using 3/4 inch wrench, remove nut (V) and
10.
washer (W). Remove latch assembly (X) from
box cover (Y).
NOTE
Box cover (Y) is part of box assembly (Z) and cannot be
removed.
CLEANING AND INSPECTION:
1.
Using dry cleaning solvent (Item 54, Appendix D), clean box, light assembly housing, cover plate,
and latch assembly.
2.
Using crocus cloth (Item 14, Appendix D), clean light socket contacts and wiring harness contacts.
Go on to Sheet 4
TA140809