TM 9-2350-222-20-1-5
EXTERNAL HANDSET BOX ASSEMBLY AND LIGHT ASSEMBLY REPAIR (Sheet 5 of 6)
5.
Using 3/4 inch wrench, install latch assembly
(F) and secure with washer (G) and nut (H).
6.
Using 1/2 inch wrench, install nut and washer
(J), pawl (K), and nut and washer (L). Make
sure pawl (K) points up when latch handle is
down.
NOTE
It may be necessary to adjust
latch in order to lock door. Latch
may be adjusted by loosening and
repositioning nuts (L) and (J) until
latch will lock to catch on box.
7.
Using 11/32 inch wrench and screwdriver,
install spring clip (M) inside box with two
screws (N), lockwashers (P), and nuts (Q).
8.
Apply silicone compound (Item 32, Appendix D)
to wiring harness (R) and connect to socket
9.
Using screwdriver, install socket assembly (S)
with two screws (T).
TA140811
16-199
