TM 9-2350-222-20-1-5
FRONT FENDERS, HEADLIGHT GUARDS, AND OUTRIGGERS REPLACEMENT (Sheet 6 of 7)
5.
Using 1-1/8 inch socket, install outrigger No. 2 (L) to hull using four screws, new lockwashers and
washers (M). Using torque wrench and 1-1/8 inch socket, tighten screws to 125-130 lb-ft (169-176
Nm).
6.
Position outrigger No. 1 and fender extension (B) to hull.
Using 1-1/8 inch socket, install outrigger No. 1 (B) to hull (N) using four screws (P) and new
6.1.
lockwashers (P.1).
7.
Install headlight guard (Q) to hull using two
screws and four washers (R).
8.
Install headlight guard (Q) to hull using two
screws (S), four flat washers (T), new
9.
Using 9/16 inch socket on screws (R) and
3/4 inch socket and 3/4 inch wrench on
screws (S) and nuts (V), tighten screws and
nuts.
Go on to Sheet 7