TM
9-2350-222-20-1-5
FENDER EXTENSION (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 4)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Inspection
Installation
TOOLS:
9/16 in. socket with 1/2 in. drive
9/16 in. combination box and open end wrench (2 required)
Ratchet with 1/2 in. drive
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237
SUPPLIES:
Lockwasher (MS35338-46)
Locking compound (Item 15, Appendix D)
Self-locking nut (MS51988-7) (2 required)
REMOVAL:
NOTE
Left fender extension is shown.
Removal is similar for right
fender extensions.
1.
Using socket, remove two self-locking nuts (A) and
-hers (B) holding fender extension (C) to
front bracket (D) and rear bracket (E). Throw
away.
Go on to Sheet 2
TA253771
Change 1
(16-72.1 blank)/16-72.2
