TM 9-2350-222-20-1-5
FRONT FENDERS, HEADLIGHT GUARDS, AND OUTRIGGERS REPLACEMENT (Sheet 5 of 7)
INSTALLATION:
Install fender extension (A), spacer (A.1) and retainer (A.2) onto outrigger No. 1 (B) using seven
1.
screws (C), new lockwashers (D), and nuts (E).
Using 7/16 inch socket on seven screws (C) and 7/16 inch wrench on nuts (E), tighten screws (C) and
2.
nuts (E).
3.
Install filler and strap (F) to fender (G) using
six screws (H), flat washers (J), new
lockwashers (H.1), and nuts (K).
4.
Using 7/16 inch socket on screws (H) and 7/16 inch wrench on nuts (K), tighten screws (H) and
nuts (K).
Go on to Sheet 6
TA253576
