TM 9-2350-222-20-1-5
FRONT FENDERS, HEADLIGHT GUARDS, AND OUTRIGGERS REPLACEMENT (Sheet 3 of 7)
4.
Using 9/16 inch socket, remove two screws and four washere (H) holding headlight guard to
outrigger No. 1 (G).
5.
Using 3/4 inch socket on screws (J) and 3/4 inch wrench on nuts (K), remove two screws, four
washers (J) and two nuts and lockwashers (K) holding headlight guard (L) to hull (M). Throw
lockwashers (K) away.
6.
Remove headlight guard (L).
Using 1-1/8 inch socket, remove four screws and lockwashers (N) holding outrigger No. 1 (G) to hull
7.
(M). Throw lockwashers away.
8.
Remove outrigger No. 1 and fender extension (G) from hull (M).
Go on to Sheet 4
TA253574
