TM 9-2350-222-20-1-5
OUTRIGGER SUPPORT NO. 4 (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4)
2.
Using 9/16 inch socket, remove two bolts
(E) holding extension bracket (C) to out-
rigger (D).
3.
Remove extension bracket (C) from out-
rigger (D).
4.
Using 3/4 inch socket and 3/4 inch wrench,
remove two screws (F) and nuts (G) holding
top flange of outrigger (D) to hull support.
5.
Using 1-1/8 inch socket and hinged han-
dle, remove four screws (H) and lockwash-
ers (H.1, if used) holding outrigger (D) to
hull support. Throw lockwashers away.
Remove outrigger (D).
6.
Go on to Sheet 3
TA25357
16-62
