TM 9-2350-222-20-1-4
UNIVERSAL JOINT REPLACEMENT (Sheet 2 of 7)
REMOVAL:
NOTE
Turn quick-disconnect clamp until it is
in working position.
1. Using cutting pliers, cut lockwire (A).
Using ratchet, extension, and 3/4 inch
2.
socket, remove screw (B).
Open quick-disconnect clamp (C).
3.
4. Remove quick-disconnect clamp (C).
5 . Deleted
Place large crowbar (D) in position to
6.
support final drive.
7 . While holding down on large crowbar (D),
use small pinch bar (E) to pry final drive
adapter assembly (F) until it comes loose
from final drive flange (G).
CAUTION
Use rope capable of picking up and
holding at least 92 pounds.
8. Attach rope (H) loosely to universal joint.
TA253400
Go on to Sheet 3
Change 5
12-12