TM 9-2350-222-20-1-4
BILGE PUMP RELAY ENCLOSURE ASSEMBLY REPAIR (Sheet 7 of 12)
Cable Assembly Replacement (Sheet 4 of 4)
5.
Place lead 451B with flat washer and new
lockwasher onto terminal.
6.
Using 7/16 inch socket, install nut (F) to
terminal A2.
7.
Place flat washer and lead 451 on terminal Xl.
8.
Using 5/16 inch socket, install nut (G) with new
lockwasher.
9.
Place cover (H) and new gasket (J) onto
enclosure assembly (B).
10.
Using cross-tip screwdriver, install four screws
(L) with new lockwashers (M).
11.
Install enclosure assembly (B) in vehicle (page
End of Task
TA139751
10-196
