TM 9-2350-222-20-1-4
Place ground lead (E) with flat washer into
4.
position on X2 terminal.
Using 5/16 inch socket, install nut (F) with
5.
new lockwasher.
Place lead 451 with flat washer into position
6.
on terminal Xl.
7.
Using 5/16 inch socket, install nut (G) with new
lockwasher.
8.
Place lead 451B with flat washer into position
on terminal A2.
9.
Using 7/16 inch socket, install nut (H) with
new lockwasher.
Place two flat washers at position (J) on circuit
10.
breaker and one flat washer at position (K) of
relay.
Position bus bar (L) over flat washers at (J) and
11.
(K).
Using 7/16 inch socket, install screw and two
12.
flat washers (J) through bus bar on circuit
breaker at position (J).
Using 7/16 inch socket, install nut and flat
13.
washer to hold bus bar at position (K).
Go on to Sheet 5
TA139755
10-200
