TM 9-2350-222-20-1-4
BILGE PUMP RELAY ENCLOSURE ASSEMBLY REPAIR (Sheet 4 of 12)
Cable Assembly Replacement (Sheet 1 of 4)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Cleaning and Inspection
Installation
TOOLS: Cross-tip screwdriver
5/16 in. socket with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
Flat-tip screwdriver
SUPPLIES: Gasket (10951769)
Crocus cloth (Item 14, Appendix D)
Steel wool (Item 55, Appendix D)
Lockwasher (MS35338-43) (4 required)
Lockwasher (MS35338-44) (2 required)
Lockwasher (MS35338-101)
Lockwasher (MS35338-98)
PRELIMINARY PROCEDURE:
Remove enclosure assembly from vehicle (page 10-188)
REMOVAL:
1.
Using cross-tip screwdriver, remove four screws
(A) and lockwashers (B) holding cover (C).
Throw lockwashers (B) away.
2.
Remove cover (C) and gasket (D). Throw gasket
(D) away.
Go on to Sheet 2
TA139748
10-193
