TM 9-2350-222-20-1-3
ENGINE SHROUD REPAIR ON THE ENGINE (Sheet 1 of 5)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Assembly
TOOLS: Ratchet with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
3 in. extension with 1/2 in. drive
Putty knife
Cross-tip screwdriver
SUPPLIES: Adhesive (Item 4, Appendix D)
Dry cleaning solvent (Item 54, Appendix D)
Rags (Item 65, Appendix D)
Lockwasher (MS35338-46) (29 required)
Gasket (8762922) (2 required)
Remove top deck assembly (page 16-21)
PRELIMINARY PROCEDURES:
Remove transmission shroud (page 9-20)
DISASSEMBLY:
1.
Using 7/16 inch socket, remove seven screws, washers, and lockwashers (A) holding three seal (B)
retainers (C) to engine shroud right and left sides. Throw lockwashers away.
2.
Remove retainers (C) from shroud.
TA140243
Go on to Sheet 2
9-6
