TM 9-2350-222-20-1-3
ENGINE SHROUD SUPPORT REPLACEMENT (Sheet 1 of 2)
TOOLS: Putty knife
9/16 in. combination box and open end wrench
SUPPLIES: Adhesive (Item 1, Appendix D)
Insulation (8762981)
Insulation (10863503)
Lockwasher (MS35338-46) (8 required)
Dry cleaning solvent (Item 54, Appendix D)
Rags (Item 65, Appendix D)
Remove top deck (page 16-21)
PRELIMINARY PROCEDURES:
REMOVAL:
1.
Using wrench, remove four screws, washers, and lockwashers (A) holding front shroud support
2.
Remove shroud support.
Using wrench, remove four screws, washers,
and lockwashers (D) holding rear shroud
support assembly (E) to engine (C). Throw
lockwashers away.
Remove shroud support.
TA140241
Go on to Sheet 2
9-4