TM 9-2350-222-20-1-3
ENGINE SHROUD REPAIR ON THE ENGINE (Sheet 2 of 5)
3.
Using screwdriver, remove two screws and lockwashers (D) hidden under seal, holding retainers
(E) to engine shroud right and left sides. Throw lockwashers away.
4.
Remove retainers (E) from shroud.
5.
Displace seals (B) from shroud right and left
sides.
Using 7/16 inch socket, remove six screws, washers, and lockwashers (F) holding two elbow
6.
retainers (G) to engine shroud. Throw lockwashers away.
7.
Remove retainers (G) from engine shroud.
8.
Remove seals (H) and elbows (J) from engine
shroud.
9.
Using screwdriver, lift front seal (K) and
remove two screws and lockwashers (hidden) (L)
holding retainer (M). Throw lockwashers away.
10.
Remove retainer (M) from shroud.
Remove seal (K) from shroud.
11.
TA140244
Go on to Sheet 3
9-7