TM9-2350-222-20-1-3
ENGINE TO TRAMSMISSION OIL LINE TUBE ASSEMBLIES (INNER AND OUTER)
REPLACEMENT (2D ENGINE) (Sheet 4 of 4)
9.
Remove rags placed under oil line disconnect points.
10.
Replenish oil lost during oil line tube assemblies removal (LO9-2350-222-12).
11.
Connect powerplant for powerplant ground hop (page 5-48).
12.
Start and run engine (TM 9-2350-222-10). Check for oil leaks at oil cooler and transmission
oil line tube assembly connections.
.
13.
Shut down engine (TM 9-2350-222-10). Disconnect powerplant from ground hop kit (page
14.
Install engine shroud (page 9-3).
15.
Install rear engine shroud support (page 9-5).
16.
Install powerplant (page 5-37).
End of Task
Change 4
6-188
