TM 9-2350-222-20-1-5
SMOKE GENERATOR ENGINE WIRING HARNESS REPLACEMENT (Sheet 2 of 7)
REMOVAL:
1.
Using 7/16 inch wrench, remove two screws (A)
and two clamps (B).
2.
Remove two clamps (B) from wiring harness (C).
3.
Disconnect two electrical connectors (D) from
two solenoids (E).
4.
Using two 7/16 inch wrenches, remove screw
and nut (F) from bracket (G) and ground lead
(H).
Go on to Sheet 3
TA140898
