TM 9-2350-222-20-1-5
SMOKE GENERATOR ENGINE WIRING HARNESS REPLACEMENT (Sheet 5 of 7)
INSTALLATION:
1.
Connect two electrical connectors (A) on two
2.
Using two 7'/16 inch wrenches, install screw
and nut (C) to secure ground lead (D) to bracket
(E).
Place wiring harness (F) in position.
3.
4.
Install two clamps (G) on wiring harness (F).
5.
Using 7/16 inch wrench, install two screws (H)
to secure clamps (G).
Go on to Sheet 6
TA140901