TM 9-2350-222-20-1-5
PERSONNEL HEATER DUCT REPLACEMENT (Sheet 1 of 3)
TOOLS: Flat-tip screwdriver
9/16 in. combination box and open end wrench
SUPPLIES: Lockwasher (MS35333-39) (4 required)
Lockwasher (MS35338-46) (4 required)
REFERENCE: TM 9-2350-222-10
Set HEATER MASTER switch to OFF (TM 9-2350-222-10)
PRELIMINARY PROCEDURE:
REMOVAL:
Using screwdriver, loosen clamp (A).
1.
2.
Slide clamp (A) over air duct hose (B).
3.
Using screwdriver, loosen four screws (C).
4.
Remove four screws and lockwashers (C)
securing duct (D) to heater. Throw lockwashers
away.
Go on to Sheet 2
TA141235
