TM 9-2350-222-20-1-5
HEATER MOUNT REPLACEMENT (Sheet 1 of 2)
TOOLS: 3/4 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
5 in. extension with 1/2 in. drive
SUPPLIES: Shims
Lockwasher (MS35338-48) (2 required)
PRELIMINARY PROCEDURE:
Remove personnel heater (page 19-20)
1.
Using socket, remove two screws (A), lockwashers (B), and washers (C) securing mount (D) to pads
(E). Throw lockwashers away.
2.
Remove mount (D) with shims (F).
NOTE
Store shims so they can be put back on same mounting pad.
Go on to Sheet 2
TA141238
