TM 9-2350-222-20-15
AIR DUCT HOSE REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1.
Place clamp assembly (A) and four clamps (B) in position on hose (C).
2.
Move hose (C) into mounting position.
3.
Install hose (C) end to duct. Slide clamp (A) over hose and duct connection.
4.
Using screwdriver, tighten clamp (A).
5.
Using 9/16 inch socket, install four screws (D) and new lockwashers (E) securing three clamps (B)
and guard (F) to hull.
6.
Using 7/16 inch socket, install one screw (G) and new lockwasher (H) securing one clamp (J) to
hull.
7.
Secure deflector (K) to tube assembly (L) with screw (M), washer (N), new lockwasher (P), and wing
nut (Q). Tighten wing nut.
Install tube assembly (L) and deflector (K) as an assembly into end of hose (C).
8.
9.
Using 9/16 inch wrench, install two screws (R) and new lockwashers (S) to secure clamp (T).
10.
End of Task
TA141233