TM 9-2350-222-20-1-5
OUTER EXHAUST PIPE REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1.
Using hammer, tap two clamps (A) into position on outer exhaust pipe (B).
2.
Place two straps (C) around pipe (B). Secure straps with two screws (D), flat washers (E), new
lockwashers (F), and nuts (G). Finger tighten nuts.
3.
Position pipe (B) assembly to exhaust elbow.
Secure pipe (B) to elbow with two screws (H), flat washers (J), new lockwashers (K), and nuts (L).
4.
Finger tighten nuts.
5.
Install two screws (M) with new lockwashers (N) to secure clamps (A) around pipe (B).
6.
Using 9/16 inch socket, tighten two screws (M).
7.
Hold screws with wrench. Using 7/16 inch socket, tighten nuts (G) and (L) at elbow and straps
(C).
End of Task
TA141231
