TM 9-2350-222-20-1-5
HYDRAULIC RESERVOIR SUCTION HOSE ASSEMBLY REPLACEMENT (Sheet 4 of 5)
INSTALLATION:
Lubricate inside of hose (A) with oil (Item 43,
1.
Install hose (A) onto suction hose (B).
2.
Install clamp (C) onto hose (A), and using
3.
screwdriver, tighten screw on clamp (C).
Position suction hose assembly (B) into hull by
4.
guiding from turret compartment, down
between reservoir and hull, and under turret
platform to suction line and adapter (D). Make
sure hose (A) is positioned to suction line.
Position clamp (E) onto hose (A), and install
5.
hose assembly (B) onto suction line. Using
screwdriver, tighten clamp (E) onto hose (A).
6.
Install clamp (F) onto suction hose (B), and
using 7/16 inch socket, install screw, new
lockwasher, and flat washer (G) to clamp (F)
and hull mount.
Goon to Sheet 5
TA141196
