TM 9-2350-222-20-1-5
HYDRAULIC RESERVOIR SUCTION HOSE ASSEMBLY REPLACEMENT (Sheet 5 of 5)
7.
Install new preformed packing (H) into adapter(D).
8.
Remove rags from adapter (D) and position
suction hose (B) to adapter (D).
NOTE
It may require two persons to
complete steps 10 thru 13.
Position half of split flange (J) onto suction hose
(B) and adapter (D).
10. Using fingers, start two screws and new
lockwashers (K) through flange half (J) into
adapter (D).
11. Position other half of split flange (J) onto
suction hose (B) and adapter (D).
12.
Using fingers, start two screws and new
lockwashers (L) through flange half (J) into
adapter (D).
13.
Using 3/4 inch socket, tighten four screws (K)
and (L) to secure suction hose (B) to adapter (D).
14.
Fill hydraulic reservoir with oil (Item 43,
15.
Close turret platform access door (TM
9-2350-222-10).
End of Task
TA141197
18-95
