TM 9-2350-222-20-1-5
HYDRAULIC RESERVOIR TO SLIPRING TUBE ASSEMBLY REPLACEMENT
(Sheet 2 of 3)
REMOVAL:
Using 1-1/2 inch wrench on nut (A), remove nut
(A) from elbow (B) while holding elbow (B) with
1-5/16 inch wrench.
2.
Using 1-1/2 inch wrench on nut (C), remove nut
(C) from elbow (D).
3.
Using socket on screw (E), remove screw (E),
lockwasher, and clamp (F) from tube (G)
making sure clamp (F) does not fall into hull.
Throw lockwasher away.
4.
Remove tube (G) from vehicle.
5.
Using 1-5/8 inch wrench on nut (H), loosen nut
(H).
6.
Using 1-5/16 inch wrench, remove elbow (D)
from reservoir connection. Throw old packing
on elbow (D) away.
7.
Remove nut (H) from elbow (D).
CLEANING AND INSPECTION:
1.
Clan tube assembly and elbows with rags and
dry cleaning solvent (Item 54, Appendix D).
2.
Check threads and tubes for damage.
3.
Replace damaged parts.
Go on to Sheet 3
TA141191
18-89
