TM 9-2350-222-20-1-5
HYDRAULIC RESERVOIR WINCH DRAIN TUBE ASSEMBLY REPLACEMENT
(Sheet 3 of 4)
CLEANING AND INSPECTION:
1.
Using rags and dry cleaning solvent (Item 54,
Inspect parts for damage.
2.
Replace damaged parts.
3.
INSTALLATION:
Lubricate threads and packings with hydraulic
1.
oil (Item 43, Appendix D) before assembling.
By hand, install nut (A) onto elbow (B).
2.
3.
Work new packing (C) onto elbow (B) and turn
nut (A) firmly down onto packing.
Using 9/16 inch wrench, install elbow (B) into
4.
reservoir mount in position to connect tube (D).
Holding elbow (B) in position with 9/16 inch
5.
wrench and using 13/16 inch wrench, tighten
nut (A).
Insert tube (D) through hole in reservoir mount
6.
(E) and aline with elbow (B) and tube connector
(F).
Go on to Sheet 4
TA141188
