TM 9-2350-222-20-1-5
HYDRAULIC RESERVOIR WINCH DRAIN TUBE ASSEMBLY REPLACEMENT
(Sheet 2 of 4)
REMOVAL:
1.
Using 13/16 inch wrench to hold union (A), use
11/16 inch wrench to remove nut (B) from
union (A).
2.
Using 7/16 inch wrench on screw (C), remove
screw (C), lockwasher, and clamps (D) from
elbow (F). Throw lockwasher away.
3.
Using 11/16 inch wrench, remove nut (E) from
elbow (F).
4.
Remove tube (G) from reservoir through hole in
resevoir mounting bracket (H).
5.
Using 13/16 inch wrench, loosen nut (J).
6.
Using 9/16 inch wrench, remove elbow (F) from
reservoir. Throw away old packing.
7.
Remove clamp (D) from tube (G).
8.
Using 13/16 inch wrench, remove nut (J) from
elbow (F).
Go on to Sheet 3
TA141187