TM 9-2350-222-20-1-5
HYDRAULIC PUMP VALVE AND ASSOCIATED LINES REPLACEMENT (Sheet 10 of 11)
Install preformed packing onto adapter (AP).
30.
Using 1-7/16 inch wrench, install adapter (AP)
31.
into reservoir
Position and connect tube assembly (M) and nut
32.
(AQ) to adapter (AP) and nut (AR) to see (AL)
Do not tighten nuts at this time.
33. Connect hose assembly (Y) to elbow (AS). Do
not tighten at this time.
34. Connect hose assembly (Z) to elbow (AT). Do
not tighten at this time.
35. Connect tube (X) to adapter (B). Do not
tighten at this time.
36.
Connect tube (W) to adapter (C). Do not
tighten at this time.
37.
Install bulldozer actuating cylinder tubes
(page 18-37).
38.
Position clamps (AU) onto tube assemblies (S)
and (T).
Using 9/16 inch socket, install screw and lockwasher (AV) to secure clamps (AU).
39.
Position clamps (AW) onto tube assemblies (W) and (X).
40.
Using 9/16 inch socket, install screw and new lockwasher (AX) to secure clamps (AW)
41.
Go on to Sheet 11
TM141156
18-54