TM 9-2350-222-20-1-5
DRIVER'S ESCAPE HATCH REPAIR (Sheet 1 of 5)
PROCEDURE INDEX
PAGE
Cleaning and Inspection
Assembly
TOOLS: 3/16 in. socket head screw key (allen wrench)
3/4 in. combination box and open end wrench
5/8 in. combination box and open end wrench
12 oz. hammer
Center punch
1/8 in. drive punch
Putty knife
10 in. adjustable wrench
SUPPLIES: Dry cleaning solvent (Item 54, Appendix D)
Silicone compound (Item 32, Appendix D)
Rags (Item 65, Appendix D)
Remove escape hatch from vehicle (page 16-133)
PRELIMINARY PROCEDURE:
DISASSEMBLY:
Using putty knife, remove seal (A) from escape
1.
hatch (B).
NOTE
Repair of three driver's escape
hatch linkage assemblies (C) is
identical.
Go on to Sheet 2
TA140747
