TM 9-2350-222-20-1-5
DRIVER'S HATCH LOCKING MECHANISM REPLACEMENT (Sheet 2 of 7)
REMOVAL:
1.
Place hatch locking mechanism in unlocked position with control handle all the way to the front.
NOTE
Plate spacers are to be tagged as
originally installed and must be
reinstalled in same manner.
2.
Using 9/16 inch wrench, remove two screws (A), lockwashers (B), and washers (C) from lock
mounting. Throw lockwashers away.
3.
Remove locking mechanism (D) and plate spacer (E) from mounting.
Go on to Sheet 3
TA140738
