TM 9-2350-222-20-1-5
DRIVER'S HATCH LOCKING MECHANISM REPLACEMENT (Sheet 3 of 7)
4.
Secure mechanism in vise and, using pliers,
remove cotter pin (F) from nut (G). Throw
cotter pin away.
Using 1-1/8 inch wrench, remove nut (G)
5.
seuring dog assembly (H).
NOTE
I t may be necessary to use
hammer to remove dog assembly
(H).
6.
Remove dog assembly (H) from pawl (J).
NOTE
It may be necessary to use
hammer and punch to remove
woodruff key (K).
7.
Remove woodruff key (K).
8.
Using pliers, remove two cotter pins (L) from
straight pin (M). Throw cotter pins away.
9.
Remove pin (M) from dog assembly (H).
TA140739
16-127
