TM 9-2360-222-20-1-4
COMPENSATING IDLER ARM ASSEMBLY REPAIR (Sheet 2 of 5)
DISASSEMBLY:
Using hammer and punch, bend tabs of key
1.
washer (A) back from nut (B).
Using hook spanner wrench (Item 25, Chapter 3
2.
Section I), loosen nut (B).
Remove nut (B), key washer (A), bearing washer
3.
(C), and inner bearing (D) from upper spindle of
arm.
NOTE
It may be necessary to tap oil seal retainer (G) lightly with
hammer to aid in removing outer bearing (F).
Remove spacer (E) and outer bearing (F) from upper spindle.
4.
Slide oil seal retainer (G) off upper spindle.
5.
Using screwdriver, pry seal (H) out of retainer (G). Throw seal away.
6.
TA141350
Go on to Sheet 3
14-68 Change 1