TM 9-2350-222-20-1-4
COMPENSATING IDLER HUB AND ARM REPLACEMENT (Sheet 1 of 3)
TOOLS: 15/16 in. socket with 3/4 in. drive
Ratchet with 3/4 in. drive
Torque wrench with 3/4 in. drive
Universal joint with 3/4 in. drive
7/8 in. combination box and open end wrench
36 in. extension with 3/4 in. drive
T-bar with 3/4 in. drive
SUPPLIES: Preformed packing (8387481)
5/8-11 UNC capscrews, 2 in. long (2 required)
Grease (Item 36, Appendix D)
Lockwashers (MS35340-50) (6 required)
PERSONNEL: Three
REFERENCES:
TM 9-2350-222-10
LO 9-2350-222-12
Remove track adjusting link (page 14-57)
PRELIMINARY PROCEDURE:
REMOVAL:
NOTE
When removing screws in next step, have second person move
hub to aline screws with removal slots.
TA249144
Go on to Sheet 2
(14-63 blank)/14-64
Change 3
