TM 9-2350-222-20-1-4
GREASE ACTUATED TRACK ADJUSTING LINK REPAIR (Sheet 4 of 4)
Put thin coat of grease (Item 36,
2.
Appendix D) on new packing (C).
3.
Install new packing (C) and pressure relief
valve (D) in yoke (E).
4.
Using torque wrench and 15/16 inch
socket tighten valve (D) 40-60 lb-ft
(54-81 N.m).
5.
Using 7/16 inch socket, install grease
fitting (F) in yoke (E).
Position support link assembly (G) on yoke (E). Using 7/16 inch socket, install two screws
6.
(H) and new lockwashers (J).
Using 7/16 inch socket, install safety relief valve (K) in adjusting link (B).
7.
Install locking collar screw (L) in adjusting link (B), but do not tighten.
8.
Install grease actuated track adjusting link (page 14-62.6).
9.
End of Task
TA249143
14-62.12
Change 3
